Showing posts with label Mad Dog. Show all posts
Showing posts with label Mad Dog. Show all posts

Monday, December 14, 2015

The Last Tour

I was originally awarded the 757/767 back in February, but this came on a fairly open-ended bid that allowed the company to converted awarded pilots more or less when they pleased (though always in seniority order). At the time the thinking was that they needed us on the line yesterday, and I assumed I'd be trained and on the line by July. As it turned out, I was dead wrong and got to enjoy another sweaty summer on the Mad Dog. I then would have been placed in training in October, except that was when I had two weeks of vacation, and in the bid preferences I had asked for the vacation to be honored. After all, that was when I was heading down to the BVI for my fourth year of sailing in the Interline Regatta. Because of the vacation, PBS only assigned me six days of flying in October, a four-day trip before the regatta and a two-day to end the month. I was subsequently assigned a 6 Nov class date, and despite my best efforts to get 1-5Nov off, PBS assigned a two-day trip on the 1st and 2nd.

I caught a lucky break and had my early October trip pulled for newhire OE, since I was paired up with a line check airman. This left me with only four days of flying to finish up my stint on the Mad Dog, 30Oct-2Nov. Coming back to any airplane after a full month off is a little uncomfortable, but once you've been on it a while it only takes a leg or two to get back into the swing of things. Of course I'd already been hard at work studying for my new airplane for a few weeks, and I had a couple minor screwups due to the negative transfer (on one takeoff roll I accidentally called "80 knots, throttle hold, thrust normal" instead of "Clamp, 80 knots, thrust normal" - which the captain thought was hilarious). Overall, though, I didn't make too many "short-timer's" mistakes.

Lord knows there was plenty of opportunity to screw the pooch. The first three days were a hilariously bad compendium of the assorted and well-known ravages of Mad Dog flying that keep senior FOs on widebody fleets long after they can hold MD captain. The weather was dogshit all up and down the east coast - low ceilings, wind, and rain - with the attendant flow programs and major delays going in and out of hub airports. We seemed to have maintenance issues on nearly every leg: a bunch of MELs, or unusual ones that required extra study, or open writeups from prior crew, breakages during preflight, and glitches enroute. We had the exact same malfunction I wrote about in my column earlier this year: the FMS spontaneously dumped all route and performance data, apparently due to a momentary power interruption. This time it happened while descending at night on a complex RNAV arrival (and getting the snot kicked out of us in heavy rain); I saw the problem right away and immediately reverted to lower automation levels while the captain coaxed a simpler clearance out of the clearly-displeased controller. That was on leg three of a long four-leg day - with two plane swaps - in and out of our largest hub. The next leg (different airplane) saw me hand-flying a no-kidding ILS approach into mountainous Asheville, NC, after the autopilot did a decidedly unsatisfactory job of tracking the localizer. We broke out about a hundred feet above minimums. Despite our late-night arrival and the driving rain, the captain accompanied me to one of my favorite Asheville watering holes for a nightcap. The brew went down easy on my last Mad Dog layover.

The last day started the same as the first three, with rain and low ceilings prompting flow delays into "Mecca." Our last leg to Minneapolis, thankfully, was blissfully smooth once we got past Nashville. The weather was decent in Minnesota, we broke out of the high overcast to see the lights of the Twin Cities stretched before us, and ATC cleared us for the visual approach quite early. I clicked off the autopilot and autothrottles at 8000 feet and enjoyed my last time handflying the old gal around the pattern to Runway 12R. My last landing wasn't perfect, but it wasn't horrible either; I'll take it. It was a little surreal to think I may have landed that plane for the last time, though I rather suspect I'll have another crack at Mad Dog wrangling at some point in my career. In the meantime, I've been advised that any misplaced nostalgia for the Mad Dog will likely disappear right about when I land the Boeing 757 for the first time!


Wednesday, December 02, 2015

Ode to Mad Dog

Long before I was assigned the Mad Dog, I knew I was destined to fly her. My company assigns seniority within new-hire classes according to the last four digits of your social security number, and with a sub-0300 SSN I was guaranteed to be one of the most junior in my class and assigned by default to the most junior seat at the airline: New York Mad Dog FO. I was at peace with that, and after six plus years of the stultifyingly automated JungleBus I was honestly ready for a challenge and a change of pace. The Mad Dog’s rugged design and old-school cockpit held a certain attraction for me, and my only real regret was that I never got a chance to fly the DC-9 before it was retired.

That said, I wasn’t quite prepared for just how busy the Mad Dog is, particularly in the right seat during ground operations. The preflight, pushback, after engine start, taxi, before takeoff, after takeoff, descent, approach, before landing, after landing, and shutdown flow patterns and checklists are all considerably longer than on the JungleBus (a couple of those nearly three times as long). Engine starts just about require three hands. Quite a few switches on the right side of the cockpit belong to the FO even while Pilot Flying with the autopilot off. The airplane has VNAV and autothrottles, but both are glitchy enough to require close attention and frequent intervention to smooth out their operation and ensure compliance with restrictions. The relatively small wing means that very careful attention must be paid to speed and maneuvering margins both after takeoff and at cruise altitude, which seldom exceeds FL330. The brakes are by turns pitifully weak and unpredictably grabby, and it’s nigh impossible to symmetrically deploy and spool up the thrust reversers. This is an airplane with a fairly steep learning curve; I did well in training only by studying my ass off (it also helped to have a sharp training partner with experience on the airplane).

Coming to the line as a brand new FO was an eye-opening workout. Many of the captains I initially flew with on reserve had been on the airplane for years and were used to an experienced FO’s pace of operations. I sometimes had to remind them that I was new and needed a little more time. Every trip I made mistakes, found more gotchas, learned new tips and tricks, and saw more unfamiliar glitches and failure modes. There’s a lot of tribal knowledge among Mad Dog drivers, much of it not written down anywhere. And then, after a couple months, I was able to hold a junior line and often flew with captains who were themselves brand new to both the airplane and the left seat. With only a couple hundred hours in the airplane, I was occasionally the “experienced guy” passing on my scant slice of the tribal knowledge.

I passed the magic 400-hour mark, releasing me from probation, after only five months of line flying. Remarkably, I found myself getting comfortable with the airplane. Actually, that’s not exactly the right way to put it, because I continued watching the Mad Dog as closely as ever, if not more so. Perhaps it is better to say that I got comfortable with being uncomfortable. Relaxed preflights, clean uncluttered cockpits, flawlessly smooth autopilots and autothrottles, and trying to stay awake as we blithely cruised across the country at FL370 all faded from memory until they seemed like distant, fanciful dreams. I came to simply accept the Mad Dog’s flaws and quirks as just the way life is. I didn’t pine for a more relaxed, more sophisticated airplane. The hardest part of coming to the Mad Dog is coming to the Mad Dog, and that was already done.

And in fact, once I accepted the plane’s busyness and quirkiness, I actually found quite a few things about it that I really liked. For starters, it’s built like a brick shithouse. The systems are simple and robust, and while there’s not a great deal of redundancy the plane doesn’t really need it as it’s not horribly dependent on hydraulics, electric, etc. The primary flight controls are all manual, with control cables driving servo tabs. It hand flies pretty well for being a notorious truck; though control forces are fairly high, it’s easy to put the plane right where you want it and keep it there. Near-centerline thrust makes single-engine work a cakewalk. The extension speeds on the very draggy flaps are ridiculously high (starting at 280 kts) so it’s easy to get down when you find yourself high. The pilots are so far forward of the engines that even on the JT8D model it’s really quiet, and though the cockpit looks like the bridge of a Russian submarine, it's actually laid out pretty logically. The Flight Mode Annunciator may look like a 1980s football scoreboard but it’s large and visible in any lighting conditions. And once you figure out the myriad controls for the cockpit lighting, it’s almost infinitely customizable which makes for a very comfortable nighttime environment.

I found myself growing downright fond of the airplane. More than one friend suggested that my newfound appreciation for the Mad Dog was nothing more than Stockholm Syndrome. Perhaps. The reality is that, much like taildraggers, a certain amount of the Mad Dog’s cachet comes not despite its flaws but because of them. It’s frequently stated to be a “real man’s airplane” (though I hasten to add that several female friends have flown it for years and claim to love it). Airbus pilots, like Cherokee drivers, are considered perhaps a little suspect for no other reason than that their airplanes can camouflage weak flying skills, while Mad Dog wranglers, like tailwheel pilots, get a (sometimes undeserved!) presumption of competence. In 757/767 training, each instructor has asked what fleet I’m coming from and, informed of my Mad Dog status, to a man they’ve given a relieved little wave and assured me I’d do great on the Boeing.

Given all this, I wasn’t planning on leaving the Mad Dog anytime soon. I enjoyed the fruits of its juniority, spending a mere six weeks on reserve in New York, soon thereafter holding weekends-off regular lines, and then getting back to Minneapolis after eight months of commuting. Of the other aircraft in my base, the Airbus has remained improbably senior (nobody wants to leave it!) and the 757/767 category was slowly shrinking. But then pending aircraft retirements were cancelled, the category got additional flying, there was movement from senior FOs upgrading to captain, and suddenly there was a bid out for fifty (!) MSP 757/767 FOs. I ran the numbers and concluded I’d have about the same seniority in either airplane. The Boeing paid more and had better trips, though I might not be able to hold international flying. I was still undecided when I had lunch with (now-former) Flying editor Robert Goyer on an Austin layover. I mentioned the possibility of bidding the Boeing but noted I’d have to spend a month at training. “Don’t you like training for new airplanes?” prodded Goyer. He had a point, I actually do, and I've wanted to fly the 757 since I was ten years old. That decided it; I put the bid in that night.

I was awarded the Boeing in February and didn’t start training until November 5th, so I had plenty of extra time to appreciate the Mad Dog. The last four days on the plane were so hilariously Maddogish that they merit their own separate post. Meanwhile I wrap up training on the Boeing in a couple days and will be enjoying some paid time off over the holidays while I wait to be assigned OE/TOE. 


Saturday, November 28, 2015

Across the Sea

(Originally written back in August)

"So, you're an airline pilot, huh? Do you fly the big planes?"

"Eh, more medium-ish. 149 to 160 passengers."

"I see. What's your route?"

"It changes from week to week. I go all over the U.S., but probably 75% East Coast."

"Oh. Any overseas routes?"

"No, the plane I fly is pretty range limited. I do a little close-in international."

"Like South America?"

"No. Like Nassau."

Such is cocktail party conversation as a Mad Dog pilot. My 757/767 friends talk of Paris and Palau and Rio, and such exotic ports of call may well beckon in my near future, but for now I mostly ply my trade to places like Huntsville, Buffalo, and Columbus. I have not yet landed in the Great White North with my new company. I have flown turns to Nassau several times, but was rerouted out of my one overnight there. I've laid over in Kingston, Jamaica; a tropical paradise it is not. Atlanta-based Mad Dog driver friends report dreamy wanderings to Providenciales (Turks and Caicos), Montego Bay, and Grand Cayman, but I do not believe any MSP Mad Dog wrangler has ever laid eyes on those bejeweled realms. We do, however, fly to Cancun, Mexico, and in fact I have gone there twice, most recently this past week.

Cancun is actually about as International as our humble fleet gets, for it involves legitimate "offshore" flying. Our other Caribbean destinations involve going "feet wet" (our New York-Florida routes also go offshore more often than not), but always within 162nm of land. This is as far as we can go without life rafts, with which only a handful of the Mad Dogs are equipped. The Cancun route nearly always goes further out and thus requires the raft-equipped aircraft. I'm not sure how 162nm came to be the magic number, as it seems somewhat arbitrary, but I surmise it must somehow relate to the offshore capability of rescue helicopters. I'm not certain that I would want to be 161nm from land with nothing but a life vest keeping me afloat and marginally visible to would-be rescuers, but don't ever plan on testing this scenario in depth.

Our jaunt across the Gulf of Mexico also exposes us to the world of Class II navigation, meaning outside of the reception area of most VORs. Not to worry, the Mad Dog's modern navigation equipment frees it from dependence on obsolescent land-based navaids. No, not GPS, silly! A $50 burner flip phone may have GPS accurate to within a couple feet, but not the Mad Dog! We use Inertial Navigation System, or INS, for long-range navigation. We have to do a full realignment before such a long flight, and then check it against a trusty ground-based NavAid before launching out into the trackless ether.

We also fly outside of the reach of radar for a short stretch, right around the changeover from Houston Center to Merida Center. Thus, we get a little practice in making position reports, usually on first contract with Merida southbound or Houston northbound. This still takes place within voice VHF communications range - we don't have HF radios installed, much less the CPDLC datalink systems now commonly used for trans-oceanic communications. The only communications challenges on Mad Dog international flights are of the linguistic variety: Mexican and Cuban controllers converse with local pilots in Spanish, making it a bit harder to keep track of who's doing what (my high-school/traveler smattering of Spanglish helps); their accents when speaking English also vary considerably, from slight to barely comprehensible. You just have to listen carefully and make inquiries if anything isn't perfectly clear. Recording the ATIS usually takes a few loops, and you definitely want the captain listening in before attempting to transcribe your clearance.

On my next fleet, of course, there will be far more opportunities to do overwater flying. This is an airplane that we operate to five continents, and I see all five represented in the MSP bid packet. Of course I'll be fairly junior so it's likely the majority of my flying will be domestic, but I think I'll be able to occasionally sample trips that take me further afield. The variety of flying was one of the reasons I bid the new category. Dawn and I have traveled to many of the places that the Boeing flies, so it's not necessarily the attraction of visiting new places, but moreso the appeal of doing something completely different than I've been doing for the last twelve years. I'm both a night-owl and able to sleep almost on command, so I think I'll be able to adjust well to the schedules (fingers crossed). And, of course, far-flung flying adventures always make good fodder for blogging!

Thursday, June 18, 2015

Hot Dog!

As mentioned a while ago, I've been awarded a slot on the 757/767, but training isn't until late October and that means I get another four months on the Mad Dog. I just had lunch with a couple of guys down in Atlanta yesterday, and though they now all fly the 757/767 one noted that he had spent "five summers on the Mad Dog...because you always measure time on that airplane in summers!" I suggested that if he's ever really bored in cruise, he should attempt to calculate how many gallons of sweat he shed over those five summers. Or not - I guess that's kinda gross.

The basic problem is that as the Mad Dog was stretched from earlier airplanes, the Auxiliary Power Unit and Air Cycle Machines ("packs") were not also upgraded to accommodate the increased cabin volume. In moderate temperatures or with both engines running at high power to put out a lot of bleed air, it's not really a problem. On the ground with a high OAT, though, both the amount of airflow and output temperature are wholly inadequate. The cockpit is a bit worse than the cabin, because you have a lot of windows, the old CRTs, electronics, and incandescent lighting put out a lot of heat, and you're sitting 120 feet forward of the packs with resulting efficiency losses through the ductwork. At times it can get miserably hot in the cockpit, especially when you're busy just before pushback. In the summer you just about have to pack a new uniform shirt & undershirt for every day of the trip.


Out of my duties as a Mad Dog FO is running the AC, largely because most of the controls are on the right side of the overhead panel. There are some tips and tricks to getting the most out of the system, and most FOs get pretty good at it. The primary controls are the packs supply switches with OFF, AUTO, and HP BLEED OFF positions, and two selector knobs, one for CKPT TEMP and one for CABIN TEMP. The indicators are L and R valve position gauges and flow gauges, as well as a larger temperature gauge that indicates either cabin temp or cabin supply duct temperature, depending on the position of a TEMP SEL knob. Most of the time this is left in the CABIN SPLY position, which along with the valve indicators is a good measure of what the system is doing at any given moment; every couple of minutes I'll flip the TEMP SEL knob over to Cabin to see how we're doing overall.

We nearly always leave the Supply switches in the AUTO position except when parked at the gate with APU off and the conditioned air hose attached to the aircraft, at which point we turn them OFF. The HP BLD OFF ("High Pressure Bleed Off") position is rarely used, though there are circumstances when it can slightly increase airflow. The temp selector switches can also usually be left in the AUTO range, which commands the system to try to attain and maintain a specific cockpit and cabin temperature. The problem is that the exact temperature you're commanding is not labeled, and every airplane is different! Most airplanes have little ink marks that previous FOs have added to show a position that works, and this makes a good starting point, but there are often multiple marks as the system changes over time with wear, maintenance and repairs. Sometimes it seems to change over the course of a single flight!

On the ground with OATs warmer than about 60º F, we leave both selector knobs pointing at about the 9 o'clock position, which commands both valves full cold and gives you about as cold of air as you can expect (sometimes adjusting them slightly higher can increase airflow, however). After takeoff, we turn the cockpit selector knob to around the 10:30 position and the cabin selector knob to slightly below whichever ink mark we've decided to use as a reference. The idea is to get the cockpit valve slightly above full cold, and the cabin valve right around the first index mark (as shown in the picture above). You want the cabin supply temperature to come off the bottom peg (lest you freeze the passengers out before decreasing the overall cabin temp to comfortable levels); I've found an initial supply temp of 50-60ºF works well. As the cabin temp comes down to the desired level (I shoot for 68° or so), I adjust the temp knob slightly higher into auto range - usually right around the reference mark - where ideally the system will modulate the supply valve to maintain a comfortable temp on its own (80-90° supply temp works well). Any further adjustments to the temperature knob are best made slowly and in small increments, lest you drive the valve full hot or cold. I've found that in about 75% of the fleet, you'll end up turning the cabin temp selector slightly lower over the course of the flight, and the cockpit temp selector slightly higher.

Sometimes AUTO mode just isn't working no matter what you do, and then we turn the affected temp selector knob to the six-o'clock position, which puts the respective pack in manual mode. At this point you are directly driving the supply valve with momentary selections hotter or colder; however, output temperature can still vary depending on engine power / bleed output, and more than one pilot has left a pack in MANUAL mode, didn't pay attention when the throttles came back on descent, and was surprised to find that the output temperature was driven so high that it tripped the pack offline altogether. The preferred technique if MANUAL mode is needed is to get the supply valve where you want it, let output temp stabilize for a minute or two, and then switch back to AUTO mode and see if it does a better job of maintaining supply valve position.

On descent, depending on destination OAT, you'll typically once again turn both knobs to the 9 o'clock position in an attempt to cold-soak the cabin before arrival - as temps are nearly guaranteed to rise on taxi-in. If it's very warm at all, I start the APU immediately after landing and open the crossbleed valves so it can assist with airflow. We normally shut down the #2 engine three minutes after landing for fuel savings, but with OAT over 85ºF we occasionally keep both engines running to the gate (especially in an airplane that has trouble keeping up on a single idling engine + APU). Once both engines are shut down at the gate, the cabin temperature is almost guaranteed to climb on APU alone; it's basically a question of how quickly you can get the warm bodies to exit the airplane! Nearly all of our gates have large and capable air conditioning machines with supply hoses, and the better rampers get these hooked up and running very quickly. In warm weather they almost always do. The problem is that in 60º-70º weather they often don't realize that this conditioned air is still very necessary on the Mad Dog. The proactive pilot will go outside and make sure they still hook up the air. Once this is complete, you can save fuel by shutting down the APU in all but the hottest temperatures.

This all applies to the normal Mad Dog. On the Big Dog, which makes up about 30% of our fleet, the controls are the same but the actual system components are different and require a different technique. The good news is that the APU is bigger and has more bleed output, and is often able to maintain a comfortable cabin temperature on the ground all on its own or with a single engine running. The bad news is that the system is far more aggressive and volatile in AUTO mode. It will run the supply valves from full cold to full hot with a tiny movement of the temperature selector knob, or sometimes all on its own. The initial after takoff setting of the knobs requires particularly close attention for the first several minutes, meaning that at a fairly busy time I'm looking up at the overhead panel every 30 seconds or so. It's far more common to have to run for a while in manual mode on the Big Dog.

This all sounds fairly labor intensive, and it is when you're new to the system, but once you're acquainted with its quirks it becomes second nature, much like the rest of the Mad Dog. I have a feeling that once I go to the 757/767 I'm going to initially be a little restless, feeling like I ought to be doing far more than I am. I'm sure I'll get used to the reduced workload, though - not to mention skating through summer as cool as a cucumber!

Monday, April 13, 2015

Dear MadDog

This is one of the hardest letters I will ever write. I'm leaving you. I didn't make this decision lightly. You're a great airplane, quirks and all, and we had some great times - even when you occasionally tried to kill me or get me violated. I grew to love you despite your faults, or maybe because of them. But now I've met someone new, somebody wonderful, and it's time for you and I to part company.

When we first met, I was both intrigued and intimidated by your age and experience, your heavy manual controls, your various aerodynamic protuberances, and your reputation as the heartbreaker of the fleet. I stayed up late at night studying your systems and practicing my flow patterns, and later flying the simulator in preparation for our first liason. And then we were together, at long last, and at first I was completely overwhelmed. Heck, it takes three hands just to get you started! But over the next several hundred hours, I became comfortable with your heavy demands, your old-school design, and your occasional nonsensical outbursts. I even started to think of them as normal. Right engine spools up eight seconds slower than the left engine? "It's a Mad Dog." VNAV mysteriously levels off at 6250 feet and refuses to descend further? "It's a Mad Dog." Get sent around because your Vref is 30 knots faster than the preceding 757? "It's a Mad Dog." Bumping through the tops because stall margin won't let you climb above FL310? "It's a Mad Dog." Number 17 in line for takeoff in ATL and it's 87 degrees in the cabin with the packs full cold? "It's a Mad Dog." I came to accept that this was just the way things were.

And yet...I heard tantalizing rumors of a sweeter, kinder plane, a pilot's airplane with boosted controls, great big engines, a long efficient wing, and a lithe, sexy airframe free of unsightly strakes and vortilons. Many of my captains knew her before they upgraded to your left seat, and in your more temperamental moments I'd hear them mutter, "Never should have left the ER!" Some of my fellow new hires were fortunate enough to fly her right out of the gate, and I couldn't help overhearing their gushing accolades of her attributes. I tried to defend you. "Yeah, well...the Mad Dog has control cables! She'll keep flying through a nuclear holocaust! And look how senior I am in the Mad Dog! I held a Saturday off last month!" But every time that other airplane taxied past, I couldn't help but cast an appreciative gaze her way. And when this bid came out, with a whole bunch of new slots in my home base, I couldn't resist her siren call. I had to find out for myself what all the fuss is about.

So I'm off on a whirlwind romance with the plane they call "The Boeing" in October. But you and still have the summer to make some last sweaty memories together. I'll never forget you, Mad Dog. And somehow I get the feeling that fate with bring us together once again, perhaps sooner than I think.



Tuesday, February 03, 2015

Great Leap Forward

My airline recently rolled out our Electronic Flight Bag (EFB), a Microsoft Surface 2 tablet, and I've been using it for about a month now. The idea of a paperless cockpit has been around for a long time, and we're a bit late to the party; EFBs have been de rigueur at most major airlines for a couple of years. The most common platform, by far, is Apple's iPad; it's used by Alaska, American, United, FedEx, and UPS, plus many regional airlines, corporate flight departments, and thousands of private pilots. There's a wide variety of well-proven off-the-shelf EFB software available for the iPad, and reams of data on the system's reliability. The FAA is getting very experienced at approving iPad-based EFB installations.

For a variety of reasons, my airline chose not to go that route. First, we are a very Windows-based company - we Mac users are barely tolerated and most training & crew applications are not supported on our machines. Secondly, Microsoft is one of our largest corporate customers, and we're currently expanding in the Pacific Northwest. Frankly, we're not a company that's entirely known for its tech savvy. It probably shouldn't come as a surprise that our choice of a fairly uncommon tablet paired with an orphaned standalone operating system (Windows RT), combined with Jeppesen having to do a custom port of their FlightDeck Pro software, resulted in rather lengthy delays. Even now, we're merely in the test phase; until the EFB is fully proven, we're still carrying around ship sets of Jepp charts and operational manuals (individual subscriptions are thankfully a thing of the past - updating Jepps was always among the most hated of pilot chores).

That said, now that the EFB is finally here, I think Microsoft, Jeppesen, and my company absolutely knocked it out of the park. For what it was designed to do, both the hardware and software are beautiful, functional, and intuitive. Here's a good measure of just how easy it is to use: I received my tablet a few days before recurrent simulator training, did the hour-long training DVD, and was able to effectively use it for the first time during two intense days in the sim (one of which, the maneuvers validation, is a graded checkride). All the present features are contained in two programs: Jeppesen FlightDeck Pro is used to view IFR enroute charts and terminal/approach/airport plates, and Secure Content Locker provides access to all company and aircraft manuals and bulletins. The operating system incorporates a number of intuitive touchscreen gestures to make it easy to smoothly switch between programs or even split the screen between them. For example, the other day my Captain and I briefed a Category III ILS approach with the approach plate on one half of the screen and the company Cat III briefing card on the other half.



My favorite feature of the Surface 2 EFB, versus equivalent iPad-based systems, is the inclusion of a very nifty hinged cover that incorporates a backup battery and keyboard. It attaches to the Surface with a magnetic hinge / power connector. While connected, the backup battery recharges the main battery. I typically carry the Surface between flights with the cover connected and closed, take it out during the preflight and input the flight plan and other information with the keyboard, and then disconnect the cover/keyboard and stow the Surface in its RAM mount (which is suction-cupped to the side window). You can leave the backup battery / keyboard attached if needed, but I've found that the mount holds the Surface alone much more securely.



 

Besides the company's stated reasons for going to an EFB system (to save fuel and waste by eliminating the paper charts, the weight of which is considerable), I believe its use also increases safety. There's a lot less heads-down time spent digging through Jepp binders for charts, especially in response to last-minute runway, procedure, and route changes. Finding and highlighting critical information is far easier than with paper charts & manuals, particularly in low-light conditions. The mounts allow for easy EFB removal for briefings; I've found that physically taking the EFB in my hands and turning towards the other pilot is far better for facilitating crew communication than facing the window as we talk. I'm also finding that having the EFB makes me far readier to dig into the manuals when I'm not quite sure about something or haven't done a particular procedure in a while; it's a lot more tempting to wing it when the definitive answers are hidden deep within one of about seven heavy paper manuals (good luck guessing which one!). Finally, casual studying for upcoming training is a lot more palatable on the Surface; I made heavy use of it for this purpose in the days before my recurrent events.



That said, there are some improvements I hope to see over time. Even though all the manuals are searchable, you still have to know which manual to search. The content locker includes a master index that tells you where various references are located but it's not clickable; it would be nice if each subject included hyperlinks to the relevant sections of each manual. We also have a paper "Fast Access Tab" that contains selections of most commonly-used reference pages from various manuals, but it's not on the EFB yet. The internal GPS is not enabled, so some nice Flight Deck Pro capabilities like geosynchronous charts & airport diagrams are not available. We are also prohibited from connecting to airborne WiFi, though it could provide invaluable updated weather, radar overlays, and turbulence plots. Both of these issues are primarily due to FAA restrictions. Hopefully once we have full approval for the EFB, we'll be able to make some headway in getting the feds to let us use its full potential.



Really, my only serious complaint is the Windows RT operating system. It's not really a bad OS, it's just completely orphaned. There are hardly any third-party apps available, and no aviation apps at all other than our custom, IFR-only copy of Flight Deck Pro. I had been hoping to use the Surface in the Pacer, but it turned out to be useless for VFR flight. I ended up buying an iPad 2 off of eBay and running WingX Pro7, which I'll write about in another post soon. Thus, we tripled the number of tablet computers in our household nearly overnight. That said, while my airline allows us to use our Surfaces for personal use (on the ground only), it was never a focus of the program. For strictly company use in the flight deck, I have very few complaints, and became an EFB addict within days of its introduction.

Friday, November 14, 2014

Kick It Out?

The following video has been making the rounds on the interwebs, showing a landing on runway 27L at Chicago O'Hare on a windy day last week:


I initially thought the plane was an AA 737, but closer inspection shows it to be a JungleBus operated for AA by Republic Airways. I have about 5000 hours in the airplane and have made my share of crosswind landings up to and including the published demonstrated crosswind limit of 38 knots (one of which was on 27L at ORD, actually). At NewCo this was considered a hard limit inclusive of gusts, and our FAA principal inspector later lowered our limit to 28 knots steady with gusts to 38. The airplane handled crosswinds very well, with more than enough rudder authority even at 38 knots crosswind component, and enough nacelle and wingtip clearance to use proper wing-low crosswind technique. In big wind, you'd start to kick out the crab and establish the aileron input just before beginning the flare, at about 50 feet.

The technique shown in the video has been criticized by some pilots, and it's definitely not ideal (especially considering the crosswind component was only 15-20 knots), but I don't think the landing was nearly as hairy as the video shows. This was shot from a long ways off using a very high-zoom lens, which greatly exaggerates angular differences (note that 27L looks about 4000' long and 400' wide!). I would guess they landed with somewhere around 5-10 degrees of crab - again, not ideal, but likely within design limits for JungleBus' robust landing gear. Looking at the video, it appears that the pilot attempted to kick out the crab late in the landing flare and didn't put in a corresponding aileron input, which rolled the plane a bit left, where the wind caught the upwind wing, so they touched down on the downwind gear while still crabbed.

I think most airlines would prefer the occasional sideloaded landing to a wingtip or nacelle strike, and for this reason many actually teach a wings-level crosswind technique. The idea is to wait until late in the flare and then kick out as much crab as possible just before touchdown; if you time it right, the plane will be aligned with centerline but on the ground before any side drift develops. You still use some upwind aileron, but only enough to hold wings level. This is a commonly taught technique on the 747 and 737 due to low nacelle clearance, on Airbus products due to the flight control software making cross-controlling difficult, and on the CRJ-200 and JungleBus' little brother JungleJet due to low wingtip clearance. I do not know whether Republic teaches the "kick it out" method on the JungleBus or the JungleJets operated by sister company Chautauqua.

In the JungleBus you have 16 degrees of bank before striking a wingtip or a nacelle. The former requires an unusually high pitch and the latter a nose-low attitude. When landing in 38 knots of crosswind, the most bank I ever saw was about 6-7 degrees. You're typically using Flaps 5 with a lot of wind additive, so you're looking at approach speeds of 140-160 knots depending on weight. There's no reason to use the "kick it out" method; the plane sideslips and lands beautifully on the upwind main wheel with perhaps 3/4 rudder deflection and 1/3 aileron deflection on touchdown, and increasing the aileron deflection throughout the landing roll greatly aids in keeping the plane tracking down centerline. It's not very different to how I land the Cub.

The Mad Dog absolutely hates being landed with any crab at all; doing so nearly always results in a nasty bounce and dramatic gyrations as the tires skip across the runway. For this reason my airline teaches a very similar wing-low technique to the one I used in JungleBus, with cross-control inputs made somewhat lower but still fairly early in the landing flare. There is less wingtip clearance on the Mad Dog than JungleBus, and the ailerons are far less effective (they're manually controlled via cables to servo tabs); the control wheel is close to full deflection on touchdown at the crosswind limit of 30 knots. I know this because a few days before the above video, I landed in Atlanta with winds 310 at 38 knots (twice in one day, actually).

It's easy to pile on the pilots in the video above, but I can say that over the course of thousands of landings I've made some real doozies and was just fortunate that no cameras were rolling. The same goes for any professional pilot flying. The pilot may have well been planning on using a wing-low technique but got a last minute sinker and he was just trying to save it from a hard touchdown. The last few seconds before landing get really busy when the winds are howling, and not just because of the crosswind - it's because your airspeed is often bouncing around +/- 10 knots, and you're making fairly dramatic pitch & power changes in response to floaters and sinkers. At the end of the day, this guy landed on centerline, in the touchdown zone, at what looked like a fairly low sink rate, and the plane appeared to handle the sideload fairly well. This was one of the first windy days since last spring, everyone's knocking the rust off, and no doubt we'll all refine our technique considerably as winter approaches.

Tuesday, July 08, 2014

Old School / New School

I’ve been flying the Mad Dog on the line for about five weeks now, have finished IOE, am on my third week of reserve, and have about 90 hours in the airplane. I wouldn’t say I’m comfortable yet – that’s going to take some time – but it’s getting more natural, I’m not having to make such a conscious effort to think ahead, I’m making fewer mistakes, and I’m up to about 90% of the speed of an experienced FO. It takes time to get used to any new airliner, but probably more than most in the Mad Dog, simply because it’s such a quirky, busy airplane. The good news is that the quickest way to get used to any airplane is to fly a lot of cycles in a short amount of time, and I’m certainly doing that.

The Mad Dog is basically a late 1980s stretch and update to a 1960s design. It is a contemporary of both the Boeing 757 and the Airbus A320, two much better designs in many respects. Perhaps a better comparison is the B737, another continually stretched and updated 1960s airplane that is not as good as it should be because Boeing maintained commonality with the earlier design. The Mad Dog’s builder was notorious for their thriftiness, reuse of existing components, and leaving as much of their designs unchanged as possible. The Mad Dog actually uses the exact same knob for its cockpit window latches as was used on the DC-3 (and -4, -6, and -7) throttle levers! Less humorously, the largest Mad Dog variant weighs in at up to 168,000 lbs MGTOW and uses the same basic wing as much smaller predecessors.

This lack of wing is the airplane’s most notable shortcoming. Its clean stall speed is quite high, which combined with takeoff warning system malfunctions has resulted in several bad accidents when crews forgot to set flaps for takeoff. After takeoff, we are limited to 15 degrees of bank until reaching a clean maneuvering speed of 250 kts or more at high weights; if a tighter turn is called for, we have to leave the slats out until maneuvering is complete. At altitude, one has to pay very close attention to airspeed, as it’s easy to get behind the power curve and be forced to descend to avoid stalling. Consequently the airplane is quite altitude-limited; it’s common to have an initial cruise altitude of FL300 or lower, a real handicap in thunderstorm season. The B737 comparison holds up here, as the newest super-stretch versions of that design are similarly limited.

In the cockpit, the Mad Dog kept many of the quirks of the original. Several systems retain manual controls and switches where competitors automated them – the pneumatic crossfeed valves, for example, or the fuel system, or engine ignition. The engine start valves are manual and must be continuously held throughout the start, making that a three-limb exercise in which the poor FO begs the Captain to taxi slower lest a pothole dislodge his finger and prompt an aborted start. The engines have no FADEC and care must be taken to avoid an overtemp or overspeed. The spoiler and flap handles are Rube Goldberg devices (held over from the original) that take practice to activate without a struggle. The whiskey compass is famously (and hilariously) mounted on the aft cockpit bulkhead, requiring a light switch and a glareshield mirror adjusted to look through another mirror in order to read it! There’s no way the FAA would certify such an arrangement on a new design, but because somebody gave the OK in 1965, the cockamamie arrangement lives on even in the Mad Dog’s younger cousin, the Angry Pup.

For all that, this is an airplane that has glass, dual FMS, autothrottles, autoland, and even VNAV. It’s all these new-school gizmos, combined with the retention of old-school systems, that make the Mad Dog so much busier than its simpler predecessors.  There's also the fact that these features represented early efforts in automation, as conceived by Long Beach - consider them an alternative vision of a future that never was. So we have glass, but the engine display shows the exact same round engine dials as the non-glass airplane, and the PFD just displays an attitude indicator; airspeed and altitude still have their own round-dial analog gauges. There’s a Flight Mode Annunciator, but it’s mounted inboard of the flight instruments, out of the pilot’s direct view despite being absolutely critical to keep in one’s scan. The autothrottles are laggy and flaky and occasionally command huge splits. The autopilot has two speed windows depending on which pitch mode you’re in, and reversion to another mode will also cause reversion to another speed if you’ve failed to keep the inactive window updated. The dual Honeywell FMS is surprisingly modern and capable (it's actually fairly similar to the JungleBus’ FMS) but since the airplane doesn’t have GPS, we can’t do RNAV approaches and frequently monitor raw data (the box determines its position through IRS/DME/DME inputs). The VNAV is unnecessarily complicated while being rather opaque and often unreliable, requiring very close attention to make sure it’s doing what you think it should be doing. That’s a pretty good description of the whole plane, really. It demands a lot of attention.

From this description you might think I dislike the Mad Dog, and nothing could be further from the truth. I’m having a blast! It’s so utterly unlike the JungleBus, and that’s 90% of the fun. The JungleBus would lull you to sleep if you let it; that’s never a threat in the Mad Dog. The plane is built like the proverbial brick shithouse. Flap and gear speeds are ludicrously high (Flaps 11 at 280 kts, Flaps 40 at 200) so there’s seldom any danger of being caught high. The engines are the penultimate -219 variant of the venerable JT8D, and are pretty reliable for an old design. Systems, though they lack automation, are extremely simple and robust. The controls are virtually foolproof (with proper maintenance; see Alaska 261); fly-by-wire in this plane means 3/8” stainless steel cables connecting the control columns to control tabs on each flying surface. The controls aren’t sporty by any means (those are pretty small tabs that you’re moving!), but the plane flies so solidly that it doesn’t really matter. It just sorta stays where you put it – kinda like the Piper Lance of my freight-dogging days, now that I think about it. The cockpit is extremely quiet, thanks to the rear-mounted engines. The seats are pretty comfortable. There are some neat unique features, like the takeoff condition computer to verify your takeoff trim setting and the dial-a-flap detent for optimized-performance takeoff configurations and get-down-quick descent settings. There are something like 30 different rheostats for ultimate night cockpit customization; I’m still figuring out which does what. Yeah, so cockpit trim pieces are always falling in my lap and the windows leaks on me every time it rains. It builds character! My airline is 100% sold on the Mad Dog’s financial performance and it seems they’ll be in the fleet for a long time to come. If the Mad Dog is going to be my upgrade airplane, I’m glad to be getting experience in it as an FO.

It’s worth noting that my airline actually has two Mad Dog variants. I'll call the newer one the Big Dog, as it seats 11 more passengers. It also has high-bypass turbofans with electronic engine control, more automated systems, and a hydraulic elevator that improves control responsiveness. Over the last couple years my airline has greatly expanded the Big Dog fleet, buying every used copy they could get their hands on; there are now roughly half as many Big Dogs as Mad Dogs. One of our largest competitors was until recently the world’s largest operator of Mad Dogs, though they call them by another name. Their variant is the exact same as ours, except they lack our quasi-glass cockpit. Our version has a different designator only because my airline insisted on it when they ordered them. Alas, the competition is rapidly forsaking their Mad Dog roots for the electric charms of the A320, making my airline the world's new Mad Dog king (especially if you count the Angry Pup, of which we're getting 88). Lots of Mad Dog FOs are moving to other airframes or to the left seat, making the Mad Dog a very common first airplane for new hires, and affording me nearly instant seniority in our junior New York base. I'll write about commuting to work there in my next post.

Sunday, June 01, 2014

The Way We Train Today

The last fifteen years or so have seen a significant change in the way that airlines train their pilots, even though in many cases the airplanes themselves have not changed (the Mad Dog being a perfect example - it's a mid-80s update to a 1960s design). The methods of instruction, means of evaluation, areas of emphasis, training footprint, and regulatory framework are all completely different than they were through most of aviation history, up until the late 1990s. There were many factors behind the seismic shift: advances in technology, greater data collection and analysis, human factors and CRM research, cultural shifts, and aggressive airline cost-cutting. Whether the new system is better is still occasionally debated by line pilots, but it's almost certainly here to stay.

I arrived at the airlines midway through the changeover, and so I got to see a glimpse of the old ways during new-hire training at Horizon, when they were just beginning to change their program. Other than that experience, most of what I know of how it used to be has been related to me by older pilots, instructors, and check airmen.

Under the old regime, there were three distinct, separate phases of training: ground training, flight training, and checking. "Ground School" typically lasted several weeks and covered all aircraft systems, limitations, and emergency procedures in great detail. Everyone - Captains,  Copilots, and Flight Engineers - was expected to learn aircraft systems at an aeronautical engineer level of understanding. Because the QRH (Quick Reference Handbook) concept was still in it's infancy and cockpit warning systems were still fairly rudimentary, it was expected that flight crews be able to diagnose malfunctions instinctively through advanced knowledge of the systems involved. This knowledge was tested through lengthy oral exams in which the questions occasionally reached a ridiculous level of detail ("How many rivets are there on the left wing?") that had little to do with the actual operation of the aircraft.

Flight training was originally conducted in the actual airplane - mostly at night when it wasn't needed for revenue operations - but moved into full-motion flight simulators as they become more advanced in the late 1970s and early 80s (later for smaller regional aircraft). The emphasis was mostly on specific maneuvers required to be tested by the FAA, and especially V1 cuts, single-engine approaches, and various other emergencies. There was little emphasis on line flying during initial training; this was reserved for line check airmen conducting Initial Operating Experience (IOE) during revenue operations. In the late 80s and 90s, as CRM became a greater emphasis item, the FAA required that airlines tack on a few LOFT (Line Oriented Flight Training) events to train & evaluate crews in their use of CRM during line operations. This was practically an afterthought at many airlines, and usually a non-jeopardy event.

The culmination of training was the "checkride," the Proficiency Check required by FAR 121.141. There was really no checking before the PC; though the instructors ultimately had to sign you off, you weren't under the microscope during training events. Woe to the pilot who failed a PC, though! At many airlines, failing a PC could be a career-ending event, especially if you were a new hire. And you could - and would - be failed for very minor deviations from ATP Practical Test Standards. Everything was geared towards passing the PC. Even at Horizon in 2004, for new hires it was a high-pressure event in which you were expected to perform flawlessly if you wished to stay employed.

Nearly all of that is gone now. First off, ground school is almost an anachronism. The vast majority of systems training is done via Computer-Based Training (CBT) - usually at home, on your own time, though most airline contracts still pay you for it. You may or may not get paper reference materials - at NewCo if you wanted them you had to print them off the PDFs at your own expense. Far better to learn to love Acrobat, and Ctrl/Cmd-F is your friend. The level of systems knowledge taught is far, far less detailed than in years past. If you're the sort of person who actually likes to know the path that an air molecule takes on its journey through an Air Cycle Machine, good luck finding that information in anything the airline provides you. They don't expect you to know it, and you will not be tested on it. The reality is that they'd just as soon have you not know it. Over the years they've come to the conclusion that crews attempting to diagnose systems malfunctions make things worse as often as they make things better. Now crews are expected to religiously use QRHs any time a system abnormality is encountered, which combined with greatly advanced indication & warning systems has greatly simplified the task of dealing with malfunctions. Meanwhile the number of aircraft limitations and emergency recall items expected to be memorized has been greatly reduced, essentially to only those time-critical safety items that aren't easily referenced in real time.

Nearly all airlines have moved to the Advanced Qualification Program (AQP) regulatory framework which replaced the old system of separate flight training and checking events. Training and checking are practically the same thing now. AQP programs typically consist of several blocks of training each consisting of a number of training modules followed by a validation. Each module has completion standards associated with it, essentially turning every event into a checking event that can be failed & required to be repeated. Meanwhile the validations are not 100% checking events; many allow for some degree of retraining and repetition of unsatisfactory maneuvers. Rather than being purely "pass-fail," most events are graded on a scale both by maneuver and by competency. For example, you may have flown a "5" V1 cut (good!) but only get a "2" in use of CRM (bad!). A mid-level passing score may involve some deviation from ATP standards, but with early recognition and correction.

Typically the earlier blocks of training now take place in "paper tigers," "systems/procedures trainers" (SPTs),  & "flight procedures trainers" (FPTs). These are all non-moving simulators of varying sophistication in which the pilot cements systems knowledge, learns flow patterns, and practices "buttonology" and basic flight procedures before moving on to the more elaborate & expensive full flight simulators. In the flight simulator, the initial emphasis is on maneuvers such as steep turns, stalls, V1 cuts, approaches, go-arounds, and landings. These lessons are followed by a Maneuvers Validation (MV) which is very similar in format to the old Proficiency Check.

LOFTs now typically make up the entire last block of training and are followed by the penultimate checkride, the Line Oriented Validation (LOE). These events help ease the transition to Initial Operating Experience, and allow the trainee to see a variety of emergencies under realistic line conditions. Where the emphasis used to be on individual performance, now crews are now expected to use all available resources in dealing with abnormal situations, exactly like they would on the line. It's entirely possible to fail a LOE by responding to a malfunction with the correct technical actions but in a "lone ranger" fashion. It's equally possible to fail the LOE for failing to speak up when your partner is doing something boneheaded.

The end result is a training footprint that is considerably shorter than in years past, and less use of the full flight simulator, which the airlines love for cost and scheduling reasons. Much of the burden of training has been shifted onto the pilot; rather than just showing up and expecting to be spoonfed, you have to do a lot of homework before training begins or you'll never keep up. That said, you're expected to remember a lot less total information than in years past. The pressure of training events has gone up, but the pressure of checking events has gone down. It's harder to flunk out, but it's also harder to sail though.

This is what the training footprint looked like on the Mad Dog (it's actually changed somewhat since, I was the last person to go through this curriculum):
  • 4 modules Systems Training. 2 SPTs, 2 FPTs. Electronic Systems Validation (eSV), an extensive computerized written test that replaces the oral exam. 
  • 4 modules Procedures Training. 4 FPTs. Procedures Validation.
  • 4 modules Maneuvers Training, all in full-flight simulator. Maneuvers Validation.
  • 4 modules Line Oriented Training, all in FFS. Line Oriented Validation. 
This is very similar to most airlines' training footprints today, including NewCo, United, USAirways, and Spirit (have had friends go through all those programs lately).

I'm happy to say that I passed each event on first try and did particularly well on the 4 validations. I studied my tail off and was assisted by a very sharp sim partner, one who had actually been a Mad Dog captain before he was displaced back to the right seat. He also happened to be an avid motorcycle rider and I had a bike in town, so we snuck in some fun rides to decompress from the grind of training. The one big hiccup was when I came down with shingles - on my face! - the day before my MV. The APD (check airman) rightly insisted that I call in sick for the MV for various reasons, not the least of which was he'd never had chicken pox and could therefore get them from me. I got on meds right away and only lost a few days, and the training department was great about rescheduling me. Unfortunately they sent my sim partner ahead without me, so I was by myself or with seat support for the remainder of training. It still went quite well. I had a very good LOE on Tuesday, sat on Mad Dog jumpseats for an observation rotation on Friday and Saturday, and start IOE tomorrow. I'm really looking forward to it. The Mad Dog is a very interesting, busy airplane, a unique combination of old and new. I'll write about that in my next post.


Friday, February 07, 2014

On The List

Ask a regional pilot what his or her career goals are, and about 75% of the time they will answer "to fly for a major airline." This can mean many different things. They may mean simply that they wish to fly a mainline-sized airplane, and a national carrier like Allegiant or Spirit might fit their plans quite nicely. They might mean a large airline with thousands of pilots and multiple crew bases, making domestic majors like jetBlue and Southwest worthy destinations. The designation could include freight companies like FedEx and UPS, or overseas airlines like Emirates. Niche majors like Alaska or Hawaiian may be tempting targets. But for many, the ultimate goal is to be hired by one of the remaining consolidated legacy carriers: Delta, United, or American (still in the process of merging with USAirways). These airlines offer good payrates, a variety of equipment, a mix of domestic and overseas flying, and significant career progression due to older pilot groups that will retire en masse in the next 15 years. Alas, there has been precious little pilot hiring at these companies over the last 13 years. Until now, getting hired at one has been akin to winning the lottery.

When I got hired at NewCo in 2007, I was aware that there was a flow-up/flow-down agreement between NewCo and the company I then called RedCo. This was a product of RedCo's bankruptcy and the compromise they reached with their pilots' union in order to form NewCo. At the time RedCo had thousands of pilots on furlough, and it was believed that many of them would staff the JungleBuses at NewCo. Therefore, NewCo pilot slots were reserved for current and future RedCo furloughees. In return for this measure of career uncertainty, off-the-street NewCo pilots were given flow-up rights whenever RedCo was hiring: 20 pilots a month, up to around 100 pilots a year, only after upgrading and completing 30 months of service at NewCo.

Ultimately, by the time NewCo started flying RedCo had recalled most of its furloughees, with the result that only four RedCo pilots ever flew for NewCo; the rest of us were off-the-street hires, and were given flow rights to RedCo. For some, this was the entire attraction of NewCo. I was more skeptical. The history of flow agreements between regional and major carriers had not been promising; they tended to only work in the downward direction. I correctly suspected that a merger was in the works, and thought there was a much better chance of me being furloughed due to flow-downs than of me flowing up to RedCo or its successor company. It was a risk I was willing to take because I figured I would get a JungleBus type rating and 1000 hours of turbine PIC before that happened, and the alternative was indefinite stagnation at Horizon. When the merger was announced and the bottom fell out of the economy more or less simultaneously, I started looking into well-paid JungleBus jobs in China pretty seriously.

But a strange thing happened: the combined airline never furloughed. They were seriously overstaffed for years, and came perilously close to furloughing several times, but their new joint pilot contract preserved both flow-up and flow-down, and the training costs of flowing their pilots down to NewCo were huge. By 2010, traffic had recovered sufficiently that they decided to hire 300 pilots; 60 of these were NewCo flows. Just before they left, NewCo was sold off to the company I call Osage Holdings, again endangering the flow. The agreement was in fact cancelled for future NewCo hires, but all pilots then on property retained flow rights. The movement afforded by the 2010 flows gave me excellent seniority the last few years while we've all been waiting for [the major airline] to hire again.

Within the last two years, [nameless major airline] has really started to hit its stride and reap the benefits of industry consolidation: restraining capacity, rightsizing equipment in each market, elevating yields, and ultimately raking in record profits. They began shifting capacity from regional carriers to mainline as industry conditions rendered the regionals increasingly irrelevant. Along the way, their pilot overstaffing evaporated even though few pilots left during the 2007-2012 retirement freeze. Many people thought they would hire in 2012. They didn't, and ended up seriously understaffed on several categories over the summer of 2013.

I was in a bar in Cape Town when I got the news on July 15th: [nameless major airline] had announced pilot hiring would commence in the fall. The wait ever since has seemed endless. The hiring moved to January as hundreds of military leave and deferred-return furloughees filled the autumn classes. I got my flow letter in October while at the Interline Regatta in the British Virgin Islands. I received a FedEx envelope with newhire paperwork to be completed just after Christmas. I got a class list with a choice of aircraft and bases to bid at the end of January. And finally, this last Monday, February 3rd, I became pilot number 11,648 on a 11,649-pilot seniority list. It's still hard for me to believe after all that has happened. I do indeed feel as though I've won the lottery. [Nameless major airline] is expected to hire at least 300 pilots this year, and it's likelier the number will be closer to 600. Absent another economic meltdown or 9/11-type event, mass retirements mean they will continue to hire for another 15 or 20 years.

It's not time to break out the champagne just yet, though. Due to one of the provisions of the flow agreement, NewCo is retaining me for "operational necessity" until April or May, at which time I'll be released to Basic Indoc training. After that I have ground school and then simulator training on my awarded aircraft, the "Mad Dog". After six and a half years of Junglebus automation, passing Mad Dog school will take a lot of hard work and knocking the cobwebs off my old freight-dog skills. Then its off to IOE ("Initial Operating Experience), learning to operate the old girl within the new system. After that I'll be commuting to reserve in New York City, and will be on probation until February of next year. During this time I am essentially an at-will employee. My greatest fear is that [nameless major airline] will take exception to my blogging or my writing for Flying Magazine; they're famously protective of their image. I'm not willing to stop either if I can help it, so I'll just keep writing professionally, objectively, and as honestly as I dare, and if it causes problems we'll cross that bridge when we come to it. Other than that, all I can do is work hard to learn my aircraft and the system, and try to make a positive impact on everyone I work and fly with. It's going to be an interesting year!

In honor of my next aircraft, an interesting video of some of its features and quirks: